Guide on Partnership Property Transfers and Chargeable Consideration Calculation
LTT on Property Transferred from a Partnership to a Partner or Connected Person
When land is transferred from a partnership to a current or former partner, or to someone connected with them, Land Transaction Tax is not usually charged on the full market value. Instead, a special formula reduces the taxable amount to reflect any economic interest already held through the partnership, so LTT applies only to the part that has genuinely changed hands.
- The chargeable consideration is usually calculated as market value multiplied by (100 − SLP)%, where SLP is the sum of the lower proportions.
- SLP is worked out by identifying the relevant owners after the transfer, linking them to corresponding partners, and comparing attributed ownership with each partner’s profit-sharing percentage before the transfer.
- A partner’s existing partnership share can reduce the taxable amount. For example, if a partner already had a 25% partnership interest, LTT may apply to only 75% of the property’s market value.
- These rules override the usual connected-party market value approach in this setting, but they are still subject to other special rules for partnership-to-partnership transfers, all-corporate partnerships, and certain property-investment partnership elections.
- Working out who counts as a relevant owner, a corresponding partner, and what the partnership share is can be complex, especially where connected persons or dissolved partnerships are involved.
Scroll down for the full analysis.
Read the original guidance here:
Guide on Partnership Property Transfers and Chargeable Consideration Calculation
LTT on property transferred from a partnership to a partner or connected person
This page explains how Land Transaction Tax applies when land is transferred out of a partnership to a partner, a former partner, or someone connected with them. The key point is that LTT is not usually charged on the whole market value as if the buyer were a complete outsider. Instead, the rules try to tax only the part of the property that has really changed hands in economic terms.
What this rule is about
Partnership property can create a problem for transaction taxes. A partner may already have an indirect economic interest in land held by the partnership. If that land is later transferred to that partner personally, or to someone connected with that partner, it would be too simplistic to treat the whole property as newly acquired.
The legislation therefore uses a special calculation. It starts from market value, but then reduces the taxable amount to reflect the share that was already effectively owned through the partnership interest.
These rules apply where a chargeable interest is transferred from a partnership to:
- a person who is or has been a partner, or
- a person connected with such a person.
The source also notes that these rules are subject to other provisions, including:
- the rules for transfers from one partnership to another partnership,
- the rules for partnerships where all partners are bodies corporate, and
- any election by a property-investment partnership to disapply these rules.
What the official source says
The official material says that the chargeable consideration is calculated using this formula:
MV x (100 − SLP)%
Here:
- MV means the market value of the property transferred.
- SLP means the sum of the lower proportions.
The effect is that the buyer is charged by reference to market value, but only for the part of that market value representing a real shift in ownership.
The SLP calculation is done in five steps:
- Identify the relevant owner or owners.
- For each relevant owner, identify the corresponding partner or partners. If there is no corresponding partner, SLP is zero.
- For each relevant owner, work out the proportion of the property they own immediately after the transaction, and apportion that proportion between one or more corresponding partners.
- For each corresponding partner, compare:
- the proportion attributed to that partner under step 3, and
- that partner’s partnership share immediately before the transaction.
Take the lower of the two.
- Add those lower proportions together. That total is the SLP.
The source defines the key concepts as follows:
- A relevant owner is someone who, immediately after the transaction, is entitled to a proportion of the property and who, immediately before the transaction, was either a partner or connected with a partner.
- A corresponding partner is a person who, immediately before the transaction, was a partner and was either the relevant owner or an individual connected with the relevant owner.
For these purposes, a joint tenant is treated as a tenant in common holding an equal undivided share.
The source also says that if the partnership has dissolved or otherwise ceased to exist, it is still treated as continuing for LTT purposes until the property is actually distributed.
What this means in practice
The practical result is often that LTT is charged on less than the full market value.
If a partnership owns a property and one partner has, say, a 25% share in the partnership profits, that partner is treated as already having an economic stake in 25% of the property. If the whole property is transferred to that partner, the rules may reduce the taxable amount so that only the remaining 75% is charged.
This does not mean the transfer is ignored. It means the legislation recognises the partner’s pre-existing stake and taxes only the additional interest effectively acquired from the other partners.
The source also makes an important technical point. Although transfers between connected parties can trigger market value treatment under general rules, the partnership calculation rules override the ordinary deemed market value rule in this context. So the relevant market value calculation is the one built into the partnership code, not a separate connected-company rule layered on top.
In practice, the buyer is still the person who must file the LTT return and pay the tax.
How to analyse it
A sensible way to approach a transaction is to ask these questions in order.
1. Is the transfer coming from a partnership?
The property must be transferred from partnership ownership. If the structure is different, these rules may not apply.
2. Who is receiving the property?
Check whether the transferee is:
- a current or former partner, or
- connected with such a person.
If not, this part of the legislation may not be engaged.
3. What is the market value of the property?
The formula starts with market value, not simply the amount paid.
4. Who are the relevant owners immediately after the transaction?
Look at who ends up entitled to the property after completion. Then ask whether each of those people was, immediately before the transfer, either a partner or connected with a partner.
5. For each relevant owner, who are the corresponding partners?
This is narrower than it may first appear. The corresponding partner must have been a partner immediately before the transaction and must be either:
- the relevant owner, or
- an individual connected with the relevant owner.
The source specifically says that a person who is not the relevant owner and is a body corporate, or otherwise not an individual, is not a corresponding partner, subject to a limited trustee-company exception mentioned in the source.
6. How much of the post-transaction ownership should be attributed to each corresponding partner?
For each relevant owner, identify their share immediately after the transfer. Then apportion that share between one or more corresponding partners.
7. Compare attributed ownership with partnership share
For each corresponding partner, compare:
- the proportion attributed to them under step 3, and
- their partnership share immediately before the transfer.
Take the lower figure.
8. Add the lower proportions together
The total is the SLP.
9. Apply the formula
Chargeable consideration = market value x (100 − SLP)%.
That gives the amount on which LTT is charged.
Example
Illustration: a partnership owns a property outright. It has four equal partners, each entitled to 25% of the partnership income profits. The partnership transfers the whole property to one of those partners.
That partner already had an indirect 25% economic interest through the partnership. On the source material’s approach, the SLP would reflect that 25% pre-existing stake. So LTT would be charged on 75% of the market value, not 100%.
The source gives a fuller example involving a transfer to a connected person.
DEF Partnership has three equal partners: D, E and F. One shop is transferred from the partnership to G, who is F’s civil partner. G is not herself a partner. The market value is £900,000.
Applying the five steps:
- G is a relevant owner because she owns the whole property after the transfer and is connected with a partner before the transfer.
- F is the only corresponding partner because F was a partner immediately before the transfer and is an individual connected with G.
- G owns 100% immediately after the transfer, and that 100% is apportioned to F as the corresponding partner.
- F’s attributed proportion is 100%, but F’s partnership share before the transfer is 33.33%. The lower proportion is therefore 33.33%.
- So SLP is 33.33%.
The chargeable consideration is therefore:
£900,000 x (100 − 33.33)% = £600,000
On the source’s worked figures, that was the amount on which LTT was calculated.
Why this can be difficult in practice
The calculation is mechanical once the inputs are clear, but identifying the correct inputs can be difficult.
One issue is working out who is a relevant owner and who is a corresponding partner. Those are defined terms, and the answer depends on the exact legal position immediately before and immediately after the transaction.
Another issue is the partnership share. The source says this is based on the proportion in which the person is entitled at that time to share in the income profits of the partnership. That may not always match capital entitlements or informal assumptions about ownership.
Connected person questions can also matter. The source example uses a civil partner, which is straightforward, but other connected-person situations may require careful analysis.
There are also special interactions with other parts of the legislation. The source expressly says these rules are subject to separate provisions for partnership-to-partnership transfers, all-corporate partnerships, and certain property-investment partnership elections. If one of those applies, this simple formula may not be the whole story.
Finally, if the partnership has dissolved, it is not safe to assume the rules fall away. The source says the partnership is treated as continuing until the property is distributed.
Key takeaways
- When property is transferred from a partnership to a partner or a connected person, LTT is based on a special market value formula, not simply the amount paid.
- The calculation reduces the taxable amount to reflect any interest the transferee already effectively held through the partnership.
- The hardest part is usually identifying the correct relevant owners, corresponding partners, and partnership shares at the relevant time.
This page was last updated on 24 March 2026
Useful article? You may find it helpful to read the original guidance here: Guide on Partnership Property Transfers and Chargeable Consideration Calculation
View all WRA LTT Guidance Pages Here
Search Land Tax Advice with Google
